KEYESTUDIO UNO R3 CNC Kit/CNC Shield V3.0 +4pcs A4988 Stepper Motor Driver + UNO R3 ATmega328P with Usb Cable for Arduino GRBL Compatible
Mega Sale! Save 27% on the KEYESTUDIO UNO R3 CNC Kit/CNC Shield V3.0 +4pcs A4988 Stepper Motor Driver + UNO R3 ATmega328P with Usb Cable for Arduino GRBL Compatible by KEYESTUDIO at MDA-MA. MPN: KS0095. Hurry! Limited time offer. Offer valid only while supplies last. Specification: (1)3D Printer CNC Shield Board V3.0 GRBL compatible. 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with
(1)3D Printer CNC Shield Board V3.0
4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
2 x End stops for each axis (6 in total) Spindle enable and direction Coolant enable
Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others)
Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
Compact design. Stepper Motors can be connected with 4 pin molex connectors or soldered in place.
Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
(2)A4988 Stepper Motor Driver
Thermal shutdown circuitry:Yes
Ground fault protection:Yes
Load short-circuit protection:Yes
Compatible logic supply: 3.3V and 5 V
Five selectable step modes: full, 1/2, 1/4, 1/8 and 1/16
1.Mix with slow current decay modes.
2.Internal UVLO and Low RDS (On) Output.
3.Automatic current decay mode detection/selection.
4.Synchronous rectification for low power dissipation.
Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver)
(3)Uno r3 Board For Arduino(more details please search the asin B0168B39N4)
1 x Arduino R3 Development Board
1 x Engraver CNC Shield Board
4 x A4988 Stepper Motor Driver
1 x 30 cm USB Cable
Features & Highlights
- Uno R3 Board for Arduino: USB-TTL used ATMEGA 16U2 chip, controller used ATMEGA 328P chip¨US ATMEL original, fast transfer and more memory:), the same circuit arrangement and work as original
- Latest Arduino CNC Shield Version 3.0: grbl compatible (open source firmware that runs on an arduino uno that turns G-code commands into stepper signals) 4-Axis support; jumpers to set the micro-stepping for the stepper drivers; runs on 12-36V DC
- A4988 Stepper Motor Driver: simple step and direction control interface; thermal shutdown circuit/cross current/ground fault/short circuit protection, five step modes; voltage: 3.3v and 5v; mix with slow current attenuation model etc
- FCC and CE certification: this high quality arduino cnc kit is well packaged, solder is very clean, everything is aligned nicely, has made function,voltage, current testing before packaging
- It is really safe and great choose for engraver 3d printer manufacturer, arduino learner and diy machine lover
|Color:||uno cnc kit|
|Package Weight:||0.25 pounds|
|Package Size:||3.5 x 2.2 x 2.2 inches|