KEYESTUDIO 3D Printer Controller RAMPS 1.4 REPRAP MENDEL PRUSA for Arduino Mega
Huge Savings Item! Save 17% on the KEYESTUDIO 3D Printer Controller RAMPS 1.4 REPRAP MENDEL PRUSA for Arduino Mega by KEYESTUDIO at MDA-MA. MPN: KS0154. Hurry! Limited time offer. Offer valid only while supplies last. Introduction It is a Mega Pololu Shield, or RAMPS for short, designed to fit the entire electronics needed for a RepRap in one small package for low
It is a Mega Pololu Shield, or RAMPS for short, designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful
Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy
service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top
of the stack.
1. Has provisions for the cartesian robot and extruder;
2. Expandable to control other accessories;
3. 3 mosfets for heater / fan outputs and 3 thermistor circuits;
4. Fused at 5A for additional safety and component protection;
5. Heated bed control with additional 11A fuse;
6. Fits 5 Pololu stepper driver board;
7. Pololu boards are on pin header sockets so they can be replaced easily or removed for use in future designs;
8. I2C and SPI pins left available for future expansion;
9. All the Mosfets are hooked into PWM pins for versatility;
10. Servo style connectors are used to connect to the endstops, motors, and LEDs. These connectors are gold plated, rated for 3A, very compact;
11. SD Card add on available
12. LEDs indicate when heater outputs on
13. Option to connect 2 motors to Z for Prusa Mendel
Features & Highlights
- It is a Mega Pololu Shield, or RAMPS for short, designed to fit the entire electronics needed for a RepRap in one small package for low cost.
- RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty room for expansion.
- Has provisions for the cartesian robot and extruder.
- Expandable to control other accessories.
- 3 mosfets for heater / fan outputs and 3 thermistor circuits.
|Color:||3d printer ramps 1.4|
|Package Weight:||0.25 pounds|
|Package Size:||4 x 2.2 x 2.2 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by KEYESTUDIO, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
this generic uv pressurization damper assy ag is suitable for mimaki ujf-3042 printers. This is a high quality generic damper that corresponds to mimaki part number m011417. The mimaki ujf-3042 and ujf-3042fx use 3 of these dampers, while the ujf-304...
By For Zebra
mpn: none, ean: 0795508848062,
AC/DC Adapter for Zebra Desktop Barcode Label Printers, fits TLP2844 LP2642 LP2042 TLP2824 LP2742 LP2622 LP2122 LP2824-Z Input: AC 100-240V 50-60Hz Output: DC 24V 3A Connector size: 5.5*2.5mmAC Adapter For Zebra TLP2844 LP2844 Label Printer with Powe...
mpn: LYSB00ME8U2TK-CMPTRACCS, ean: 0665230340304,
UpBright® NEW Global AC / DC Adapter For HP Deskjet 3500 3550 3650 3653 3745 3745v Color Printer Power Supply Cord Cable Charger Mains PSU CECCCROHS 100-240World Wide Input Voltage 100-240VAC 50/60Hz. OVP, OCP, SCP Protection (OVP: Over Voltage outp...
mpn: HP Photosmart A536 A430 385 Q6387L 375, ean: 0608410667235,
UpBright® 32V AC Adapter For HP Photosmart A536 A430 385 Q6387L 375 Q3415A Q3419A Q3419AR Q3422A Q3423A Photosmart375 A526 A530 A525 A630 380 A440 Q8507A#ABA A420 Q6366A 330 Q6377A 420 Q6366A VCVRA-0501 Q6366A-101 Q6366A-102 Q6387A#ABA Q6387C#UUW Q6...
By Laser Xperts Inc
mpn: RM2-7909-000CN, ean: 0768855214521,
Engine controller PC board - Duplex - CLJ Pro M477 / M452 series...
mpn: Canon K30287 Pixma iP100 Mini260 iP90V, ean: 0600841601819,
UpBright NEW 16V AC / DC Adapter For Canon K30287 Pixma iP100 Mini260 iP90V iP90 iP100 iP-90V i70 i-70 i80 i-80 i90 i-90 mini320 mini 260 mini 320 Wireless Mobile Printer MG1-3607-000 DR-2050c DR-2010c DR-2080c 16VDC 1.8A 2.0A 2A - 2.8A Power Supply ...
mpn: 43272-3124, ean: 0710525834317,
*Overheating Protection with Smart Chip * Overload Protection with High Quality Wires * Anti-Interference Feature with better Isolation Materials * chargers manufactured with the highest quality materials and include multiple smart features safegua...
mpn: KS0095, ean: 9320689532014,
Specification: (1)3D Printer CNC Shield Board V3.0 GRBL compatible. 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13) 2 x End stops for each axis (6 in total) Spindle enable and dire...
mpn: 191150, ean: 4897075381662,
SPECIFICATION •Brand: Anet •Suitable for: Anet A2/A6/A8 3D Printer •Voltage Input: 12V •Mainboard Size: 10 * 9.5 * 2 cm / 3.9 * 3.7 * 0.8 inch •Mainboard Weight: 63g / 2.2oz •Package Size: 12 * 11 * 3...
mpn: RM2-8063-000CN, ean: 0783583634557,
DC controller - DUPLEX models - M252 / M274 / M277...