Hitommy Cb09 Blade Holder With 3Pcs 30/45/60 Degree Cutting Blades For Vinyl Cutter Plotter
Huge Savings Item! Save 17% on the Hitommy Cb09 Blade Holder With 3Pcs 30/45/60 Degree Cutting Blades For Vinyl Cutter Plotter by Hitommy at MDA-MA. MPN: 1084923. Hurry! Limited time offer. Offer valid only while supplies last. Description: CB09 Blade Holder With 3pcs 30/45/60 Degree Cutting Blades For Vinyl Cutter Plotter Specification: Holder Material: Cemented Carbide
CB09 Blade Holder With 3pcs 30/45/60 Degree Cutting Blades For Vinyl Cutter Plotter
Holder Material: Cemented Carbide
Blade Material: Stainless Steel
1pc x CB09 Holder
1pc x 30°Blade
1pc x 45°Blade
1pc x 60°Blade
Blades Cutting Depth:
1.30° Blades (yellow cap) for Cutting large fonts and thick material which about 1mm (eg: reflective material, masking tapes, etc)
2.45° Blades (red cap) for Cutting general fonts and vinyl film and material within 1mm (eg: vinly for traffic sign, flocks, etc)
3.60° Blades (blue cap) for Cutting very small font & intricate line-art logos and material within 0.5mm (eg: any thin vinyls)
Materials with ultra - hardness, carbide, super - toughness, longer wear and edge grinding with ultrafine polishing, edge more.
Suitable for polishing wood, pvc mahogany color, precision, MDF and other relief.
1. Blade should not extend too long,generally within half a millimeter is better, while paying attention to extended balde longer properly when carve the
small print, in order to avoid the blade holder take the carved strokes away. Suitably engraved small print with new cutter and slow down.
2. When the word carved with angular phenomenon,you should change the blade to eliminate the problem,if the phenomenon persists after change blade,
it should be the holder problem.
3. When problem arise the blade holder,try a drop of oil in the bearing and rotate the blade several times to lubricate, if still unresolved, consider replacing the
1pc x Blade holder
3pcs x 30/45/60°Cutter Blades
Features & Highlights
- Holder Material: Cemented Carbide
- Blade Material: Stainless Steel
- 1pc x CB09 Holder
- 1pc x 30°Blade
- 1pc x 45°Blade