Bestgle CB09 Graphtec Cutter Blade Holder with 15pcs 30°/45°/60° Blades for Vinyl Cutting Plotter Cutter Blades
Mega Sale! Save 30% on the Bestgle CB09 Graphtec Cutter Blade Holder with 15pcs 30°/45°/60° Blades for Vinyl Cutting Plotter Cutter Blades by Bestgle at MDA-MA. MPN: Other. Hurry! Limited time offer. Offer valid only while supplies last. Specification: Blade Holder Material: carbide Length: 51.8mm(2.04 inches) Compatible with: Graphtec CB09U CB09 Cutter Blades Material: Hard Alloy
Length: 51.8mm(2.04 inches)
Compatible with: Graphtec CB09U CB09
Material: Hard Alloy
Length: 19.8mm(0.78 inch)
Degree of Blade: 30 ° / 45 ° / 60 °
30° Blades (Blue cap) for Cutting large fonts and thick materials which about 1mm.(eg: reflective material, masking tapes, etc.)
45° Blades (Red cap) for Cutting general fonts and vinyl film.(eg: vinyl for traffic sign, flocks, etc.)
60° Blades (Yellow cap) for Cutting very small font & intricate line-art logos.(eg: any thin vinyls)
1. Blade should not extend too long, generally within half a millimeter is better, while paying attention to extended balde longer properly when carve the small print, in order to avoid the blade holder take the carved strokes away. Suitably engraved small print with new cutter and slow down.
2. When the word carved with angular phenomenon,you should change the blade to eliminate the problem,if the phenomenon persists after change blade, it should be the holder problem.
3. When problem arise the blade holder,try a drop of oil in the bearing and rotate the blade several times to lubricate, if still unresolved, consider replacing the blade holder.
1 x Blade Holder
5 x 30° Cutter Blade with Cap
5 x 45° Cutter Blade with Cap
5 x 60° Cutter Blade with Cap
15 x Springs
Features & Highlights
- Vinyl Plotter Blade Holder with 15pcs Blades, compatible with Graphtec CB09U CB09
- Carbide blade holder, ultra-hardness, super-toughness, more wear and edge grinding wheel with ultrafine polishing, edge sharper
- Fine polishing process, suitable for mahogany, wood, PVC color board, MDF and other precision relief
- Hard Alloy Cutter Blade, better abrasion resistance, 0.9mm shaft diameter suitable for many cutting plotters
- 3 kinds of degrees blades suitable for all standard cast and vinyls as well as other thin materials(30 ° / 45 ° / 60 °, Each degree 5pcs)
|Item Weight:||0.2 pounds|
|Package Weight:||0.18 pounds|
|Package Size:||3.15 x 1.97 x 1.97 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Bestgle, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: 1482B002AA, ean: 0088021021181,
High-performance cutter blade accurately cuts high volume print jobs including posters banners and presentations. Handles larger wide format paper rolls up to 44-inches in width. Easy to replace and install. Accessory Type: Cutter Depth: 4.3 in Heigh...
By Precise Carbide
mpn: PC-IO60118-ST-1, ean: 0643019965931,
Ioline Cobra Blade 60, Offset 1.18mm....
mpn: 4328384519, ean: 5055910006753,
Standard Blade for Summa D sign Vinyl Cutter or Cutting Plotter
High quality and extra long life
Angle: 45° (other angles are also available: 45° and 60°)
Package with a Safe Plastic Box: 5pc
We are happy to replace goo...
mpn: CR357-67007, ean: 4054842565032,
Cutter assy - DesignJet T920 / T1500 / T2500 / T3500 series...
mpn: Ologymart22781898, ean: 0600182745883,
Description:15pcs 30/45/60 Degree Vinyl Cutter Blade And Blade Holder for Roland Cutting PlotterSpecifications:Blade Holder for Roland:Material: Aluminum alloy (surface oxidation)Total length: 41mmRoland blades:Material: Stainless SteelHandle diamete...
mpn: Ologymart22781929, ean: 0600182746194,
Description:Vinyl Cutter Plotter Holder with 15pcs 30 45 60 Degree BladesSpecification:Blade holderMaterial: Aluminum alloyTotal length: 50mmDiameter: 12mmBladesMaterial: tungsten steelHandle diameter: 2mmOverall Length: 22mmTip diameter: 1.0mmAngle:...
mpn: Walfrontisxv6bggpt, ean: 0663862850420,
These cutter blades are the standard blades that used for vinyl cutter. They are recommended for all standard cast and vinyls as well as other thin materials. The cutting edge quality is good with high hardness, greater strength, better abrasion resi...
By Zetek Digital
CB09 HOLDER for CB09 blade Aluminum-precision vertical adjustment Double bearings-neodymium magnets Fits Craft Robo models 1pk per box, Blades Sold Separately.Replacement for PHP32-CB09N-HS blade holder. Aluminum-precision vertical adjustment. Double...
Description: Roland OEM blades are designed to replace your original blade for your Roland® Vinyl Cutter. The 60 degree blades are meant for cutting thick materials such as fashion flock. When your blade wears out, keep these replacement blades nea...
Description: Roland OEM blades are designed to replace your original blade for your roland vinyl cutter. The 45 degree blades are meant for lighter vinyl or standard vinyl cutting. When your blade wears out, keep these replacement blades nearby so th...