ATPWONZ 15pcs 30/45/60 Degree Vinyl Cutter Graphtec Plotter Blades with Springs for CB09 Silhouette Cameo
ATPWONZ 15pcs 30/45/60 Degree Vinyl Cutter Graphtec Plotter Blades with Springs for CB09 Silhouette Cameo by ATPWONZ at MDA-MA. MPN: 120329. Hurry! Limited time offer. Offer valid only while supplies last. ATPWONZ 30/45/60 degree cutting blades, 5pcs for each degree, use with CB09 blade holder - Material: tungsten cemented carbide, Blade sharp and
- Material: tungsten cemented carbide, Blade sharp and durable
- The blade come with a high quality soft plastic protector cover, also with 15pcs spring.
- Length of Blade: 19mm
- Blade Diameter: 0.9mm
- 30°Blades for Cutting large fonts and thick materials which is about 1mm.
- 45°Blades for Cutting general fonts and vinyl film which within 1mm.
- 60°Blades for Cutting very small font & intricate line-art logos which within 0.5mm.
1.Unscrew the top then remove the cover over the blade and put the blade in the holder, then the spring over the blade.
2.Is very easy, first you unscrew the black part of the blade holder, then you put the blade inside the hole (the protection must be in the oposite side of the hole), next you remove the protection but use your fingers to keep the blade inside the hole, and now very carefully slide de spring trough the blade finally screw the black part of the blade holder back.
- Suitable for mahogany, wood, PVC color board, MDF and other precision relief.
5x Blades of 30 Degree
5x Blades of 45 Degree
5x Blades of 60 Degree
Springs x 15pcs
Each 5pcs of blades are packed in a small plastic case
Note: The Graphtec Blade Holder is NOT included!!
Blade Holder and Blades set: B07F8ZY4FP
Features & Highlights
- [Sharp Blade] Cutting blades are made from tungsten cemented carbide, high hardness (hra92.6), sharp and precision blade cuts vinyl well
- [30 Dgree Cutter Blades] 30° blades are predominantly used for cutting very thin window tint and mylar materials (eg: any thin vinyl)
- [45 Dgree Lettering Blade] 45°blades are the standard blade that comes with most vinyl cutters, Cutting general fonts, vinyl film.(eg: vinyl for traffic sign, flocks, etc.)
- [60 Dgree Vinyl Cutter] 60° blades are recommended for thicker materials about 1mm. (eg: reflective material, masking tapes, etc.)
- [Well Packed] Each 5pcs of blades are packed in a small plastic case. Three cases are put in a paper box with filler for safety
|Package Weight:||0.1 pounds|
|Package Size:||4.17 x 1.65 x 1.65 inches|