Login       My Wishlist
  My Cart
$0.00 / 0 items
 
MDA-MA
Printing Solutions For Every Application
 
International Access
Global Shipping Options Available
Home About Us News Our Blog Our Catalog My Cart My Account Track Shippment Contact Us
  Our Catalog

How to Keep Your Scanner Clean


Making sure your scanner is in tip top condition is the key to the life of your equipment and good quality image scans. Experts recommend that a scanner flat bed be cleaned about every 100 scans and that the rollers inside be cleaned every 3,000 to 5,000 documents. Usually the glass flat bed of a scanner can be cleaned with glass cleaner, but the interior is trickier, many times requiring the help of a professional or the use of a scanner roller kit.

To perform a maintenance cleaning at home, you will need:

1. Non-streak glass cleaner
2. Soft, lint-free cloth
3. Can of compressed air
4. Mild soap/detergent
5. Scanner roller kit (optional)

To Clean the Scanner Bed:

A good scanner bed is made out of glass, and as we all know, glass can get dirty and dusty at the drop of a hat. And a scanner that is not crystal clear makes for an image that can be distorted or look soiled. To begin, spray the glass cleaner on your non-abrasive cloth. Wipe glass bed until you have gotten rid of all fingerprints and debris. Then, wipe the bed again with the dry end of the cloth to get streak-free results. Be sure to never spray the scanner bed surface directly with the cleaner.

To Clean the Chassis (Scanner Exterior):

First, remove all dust and dirt by spraying the chassis with a can of compressed air. Second, work on any grease marks found on the chassis with warm soapy water that contains a mild detergent safe for cleaning plastic. Your ordinary liquid dish soap is appropriate for this type of surface. For stubborn grease spots, you can also use a solvent.

To Clean the Scanner Interior:

Most scanner manufacturers do not recommend any interior cleaning be performed except by a professional service. Some manufacturers, however, suggest using a specific cleaning device called a scanner roller kit you can purchase at stores that sell computer supplies. But, if you don't want to front the cost of either of these options, some manufacturers recommend cleaning the bed with either a soft camel hair brush or a can of compressed air.

Preventing Dirt and Debris from Coming Back:

To make cleaning easier each time, follow these simple rules:

1. Do not scan documents that have white corrective liquid on them. With the heat the scanner produces, the liquid can become soft and stick to the scanner bed.
2. Always keep an eye out for dirt and debris that can fall onto your scanner flat bed. Make sure you do not have food around your scanner as this is one of the biggest culprits.
3. Be aware of larger items such as staples or rubber bands that can fall into the crevices of your scanner.

 


Comments (0)

There are currently no comments on this post. Be the first one!


Add Comment


Login/Register

Already A Member? You can log into your account here.

First Name:
Last Last:
Email Address:

Select Username:
Select Password:
Verify Password:

Your Bio: (Optional. Introduce your self, and some of your work, interests and hobbies.)



Privacy Policy / Terms of Service
© 2018 - mda-ma.org. All Rights Reserved.